Pillgram::Audio: Difference between revisions
From Amar
Jump to navigationJump to search
Pillgram TLV320AIC3110 Audio Schematics |
→Schematics: File with copyright |
||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
= TLV320AIC3110 = | = TLV320AIC3110 = | ||
== Schematics == | == Schematics == | ||
[[File:Tlv320aic3110-schematics.png|thumb]] | [[File:Tlv320aic3110-schematics-copyright.png|thumb]] | ||
== Device Tree == | |||
<syntaxhighlight>/dts-v1/; | |||
/plugin/; | |||
/ { | |||
compatible = "brcm,bcm2712", "brcm,bcm2711", "brcm,bcm2835"; | |||
fragment@0 { | |||
target = <&i2s>; // For RPi4 | |||
__overlay__ { | |||
status = "okay"; | |||
#sound-dai-cells = <0>; | |||
brcm,tx-channels = <2>; | |||
brcm,rx-channels = <2>; | |||
}; | |||
}; | |||
fragment@2 { | |||
target-path = "/"; | |||
__overlay__ { | |||
codec_1v8_reg: codec-1v8-reg { | |||
compatible = "regulator-fixed"; | |||
regulator-name = "tlv320aic3104_1v8"; | |||
regulator-min-microvolt = <1800000>; | |||
regulator-max-microvolt = <1800000>; | |||
regulator-always-on; | |||
}; | |||
}; | |||
}; | |||
fragment@3 { | |||
target = <&i2c1>; | |||
__overlay__ { | |||
#address-cells = <1>; /* Single cell for I2C address */ | |||
#size-cells = <0>; /* No size cells for I2C devices */ | |||
status = "okay"; | |||
tlv320aic3110: tlv320aic3110@18 { | |||
compatible = "ti,tlv320aic3110", "ti,tlv320aic311x"; | |||
reg = <0x18>; | |||
#sound-dai-cells = <0>; | |||
// system-clock-frequency = <12288000>; // Codec clock config | |||
// system-clock-direction-out; // Codec as master | |||
status = "okay"; | |||
HPVDD-supply = <&vdd_3v3_reg>; | |||
SPRVDD-supply = <&vdd_5v0_reg>; | |||
SPLVDD-supply = <&vdd_5v0_reg>; | |||
AVDD-supply = <&vdd_3v3_reg>; | |||
IOVDD-supply = <&vdd_3v3_reg>; | |||
DVDD-supply = <&codec_1v8_reg>; | |||
clocks = <&mclk_external>; | |||
clock-names = "mclk"; | |||
// system-clk-frequency = <12288000>; | |||
mclk-frequency = <12288000>; | |||
// gpio-controller; | |||
/* PLL configuration for 48kHz with 12.288MHz MCLK */ | |||
pll-p = <1>; | |||
pll-r = <1>; | |||
pll-j = <7>; | |||
pll-d = <1680>; | |||
reset-gpios = <&gpio 13 0>; // GPIO 13 as active high | |||
reset-delay-us = <10000>; /* 10ms delay */ | |||
// Debug properties | |||
debug; | |||
linux,debug; | |||
}; | |||
}; | |||
}; | |||
fragment@5 { | |||
target = <&sound>; | |||
__overlay__ { | |||
compatible = "simple-audio-card"; | |||
simple-audio-card,name = "TLV320AIC3110"; | |||
simple-audio-card,format = "i2s"; | |||
// simple-audio-card,bitclock-master = <&dailink0_master>; | |||
// simple-audio-card,frame-master = <&dailink0_master>; | |||
simple-audio-card,widgets = | |||
"Microphone", "Mic Jack", | |||
"Speaker", "Speaker Left", | |||
"Speaker", "Speaker Right"; | |||
simple-audio-card,routing = | |||
"Speaker Left", "SPL", | |||
"Speaker Right", "SPR", | |||
"MIC1LP", "Mic Jack", | |||
"MIC1LM", "Mic Jack"; | |||
status = "okay"; | |||
simple-audio-card,cpu { | |||
sound-dai = <&i2s>; | |||
}; | |||
dailink0_master: simple-audio-card,codec { | |||
sound-dai = <&tlv320aic3110>; | |||
clocks = <&mclk_external>; | |||
system-clock-frequency = <12288000>; //*** added LAX | |||
mclk-fs = <256>; //*** added LAX | |||
}; | |||
}; | |||
}; | |||
fragment@6 { | |||
target-path = "/"; | |||
__overlay__ { | |||
mclk_external: mclk_external { | |||
compatible = "fixed-clock"; | |||
#clock-cells = <0>; | |||
clock-frequency = <12288000>; // 12.288 MHz | |||
clock-output-names = "mclk"; | |||
}; | |||
}; | |||
}; | |||
}; | |||
</syntaxhighlight> |
Latest revision as of 23:02, 8 January 2025
TLV320AIC3110
Schematics
Device Tree
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2712", "brcm,bcm2711", "brcm,bcm2835";
fragment@0 {
target = <&i2s>; // For RPi4
__overlay__ {
status = "okay";
#sound-dai-cells = <0>;
brcm,tx-channels = <2>;
brcm,rx-channels = <2>;
};
};
fragment@2 {
target-path = "/";
__overlay__ {
codec_1v8_reg: codec-1v8-reg {
compatible = "regulator-fixed";
regulator-name = "tlv320aic3104_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};
};
fragment@3 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>; /* Single cell for I2C address */
#size-cells = <0>; /* No size cells for I2C devices */
status = "okay";
tlv320aic3110: tlv320aic3110@18 {
compatible = "ti,tlv320aic3110", "ti,tlv320aic311x";
reg = <0x18>;
#sound-dai-cells = <0>;
// system-clock-frequency = <12288000>; // Codec clock config
// system-clock-direction-out; // Codec as master
status = "okay";
HPVDD-supply = <&vdd_3v3_reg>;
SPRVDD-supply = <&vdd_5v0_reg>;
SPLVDD-supply = <&vdd_5v0_reg>;
AVDD-supply = <&vdd_3v3_reg>;
IOVDD-supply = <&vdd_3v3_reg>;
DVDD-supply = <&codec_1v8_reg>;
clocks = <&mclk_external>;
clock-names = "mclk";
// system-clk-frequency = <12288000>;
mclk-frequency = <12288000>;
// gpio-controller;
/* PLL configuration for 48kHz with 12.288MHz MCLK */
pll-p = <1>;
pll-r = <1>;
pll-j = <7>;
pll-d = <1680>;
reset-gpios = <&gpio 13 0>; // GPIO 13 as active high
reset-delay-us = <10000>; /* 10ms delay */
// Debug properties
debug;
linux,debug;
};
};
};
fragment@5 {
target = <&sound>;
__overlay__ {
compatible = "simple-audio-card";
simple-audio-card,name = "TLV320AIC3110";
simple-audio-card,format = "i2s";
// simple-audio-card,bitclock-master = <&dailink0_master>;
// simple-audio-card,frame-master = <&dailink0_master>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Speaker", "Speaker Left",
"Speaker", "Speaker Right";
simple-audio-card,routing =
"Speaker Left", "SPL",
"Speaker Right", "SPR",
"MIC1LP", "Mic Jack",
"MIC1LM", "Mic Jack";
status = "okay";
simple-audio-card,cpu {
sound-dai = <&i2s>;
};
dailink0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3110>;
clocks = <&mclk_external>;
system-clock-frequency = <12288000>; //*** added LAX
mclk-fs = <256>; //*** added LAX
};
};
};
fragment@6 {
target-path = "/";
__overlay__ {
mclk_external: mclk_external {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12288000>; // 12.288 MHz
clock-output-names = "mclk";
};
};
};
};